Trident's deepest wet look and strongest joints

Trident Hurricane CAT 5 | 2 Part Urethane Sealer | 7 Gal Kit (Makes 15-20 Gal)

Trident Protects USA

Regular price
$1,299.00
  • Fast, tracked shipping
  • Prices in CAD

Trident Hurricane CAT 5 is a super-concentrated, water-based 2-part aliphatic urethane sealer for pavers and concrete with the deepest wet-look enhancement, high gloss and Trident's strongest joint sand stabilization. One 7 gal kit makes 15 gallons ready to use at D1, or 20 gallons at D2. Stocked in Canada.

  • 7 gal kit = 15 gal (D1) / 20 gal (D2)
  • Wet look, high gloss
  • Stocked in Canada
  • Low VOC

Key benefits

Why choose Trident Hurricane CAT 5

  • Deepest wet look

    Deepest colour enhancement and high gloss (T3 True Tone Technology)

  • Strongest Armor Bond

    Armor Bond: strongest joint stabilization to reduce sand washout, weeds and insects

  • Salt and chemical guard

    Guards against salt, mild acid, alkali and other corrosives

  • Fungal Guard

    Antifungal Fungal Guard protects the film from mould, moss and algae

  • Breathable

    Breathable: will not trap efflorescence or moisture; apply to new, clean, dry surfaces without waiting

  • Non-yellowing, low VOC

    Will not yellow in sunlight; low VOC

At a glance

Specifications

Trident Hurricane CAT 5 specifications
Type2-part water-reducible clear aliphatic urethane, film forming
FinishWet look, high gloss
Kit7 gal kit: one 5 gal pail Part A + two 1 gal Part B
Yield (ready to use)15 gal ready to use at D1 ratio; 20 gal ready to use at D2 ratio (per 7 gal kit)
Choosing a ratioD1: more gloss and stronger joint stabilization. D2: leaner, economy ratio
Coverage (mixed)80-120 sq ft/gal with joint stabilization; 200-300 sq ft/gal sealing only
RecoatWhen first coat has cleared and is dry to touch, usually about 1 hour
VOCLow VOC
SurfacesConcrete, stamped concrete, concrete wall block, clay pavers, natural stone, manufactured stone, travertine, exposed aggregate

Works on

  • Concrete
  • Stamped concrete
  • Concrete wall block
  • Clay pavers
  • Natural stone
  • Manufactured stone
  • Travertine
  • Exposed aggregate

How to use

Step-by-step application

  1. Clean and dry

    Clean the surface (OxyShock MAX for organics, EffBOMB for efflorescence) and let it dry; for joint stabilization the surface must be dry.

  2. Re-sand joints

    Re-sand joints with SEK Jointing Sand if needed.

  3. Mix and dilute

    Mix Part A and Part B, then dilute with water at the D1 ratio (one 7 gal kit makes 15 gal ready to use) or the D2 ratio (20 gal ready to use), following the Trident label. D1 gives more gloss and stronger joint sand stabilization; D2 is the leaner, economy ratio.

  4. Test an area

    Test in a small area to verify appearance.

  5. Flood coat

    Apply the first coat as a flood coat at 80-120 sq ft per gallon (mixed) to saturate the joints, with no pooling.

  6. Second coat

    Apply the second coat once the first has visually cleared and is dry to the touch, usually about one hour.

Compare

How Trident Hurricane CAT 5 compares

Side-by-side with alternatives from our catalogue.

FeatureCAT 5CycloneBreak Wall
Type2-part urethane, water based, film formingWater based, film formingSilane/siloxane, penetrating; made by Trident in Illinois, USA
FinishWet look, high glossMatte, naturalInvisible
Joint stabilizingYes (strongest)YesNo
Coverage (per gal, manufacturer)80-120 sq ft with joints; 200-300 sealing only (mixed)80-120 sq ft with joints; 150-250 sealing only75-200 sq ft pavers; 100-200 concrete

Swipe the table sideways to compare.

Full product details

Trident Hurricane CAT 5 is a super-concentrated, water-based 2-part aliphatic urethane sealer for pavers and concrete that gives the deepest wet-look colour enhancement, a high-gloss finish and Trident's strongest Armor Bond joint sand stabilization. One 7 gal kit makes 15 gallons of ready-to-use sealer at the D1 dilution ratio, or 20 gallons at the D2 ratio. D1 gives more gloss and stronger joint sand stabilization; D2 is the leaner, economy ratio. It is stocked in Canada and recommended for professional application.

Key benefits of CAT 5

  • Deepest colour enhancement and high gloss (T3 True Tone Technology)
  • Armor Bond: strongest joint stabilization to reduce sand washout, weeds and insects
  • Guards against salt, mild acid, alkali and other corrosives
  • Antifungal Fungal Guard protects the film from mould, moss and algae
  • Breathable: will not trap efflorescence or moisture; apply to new, clean, dry surfaces without waiting
  • Will not yellow in sunlight; low VOC

CAT 5 specifications

Specification Detail
Type 2-part water-reducible clear aliphatic urethane, film forming
Finish Wet look, high gloss
Kit 7 gal kit: one 5 gal pail Part A + two 1 gal Part B
Yield (ready to use) 15 gal ready to use at D1 ratio; 20 gal ready to use at D2 ratio (per 7 gal kit)
Choosing a ratio D1: more gloss and stronger joint stabilization. D2: leaner, economy ratio
Coverage (mixed) 80-120 sq ft/gal with joint stabilization; 200-300 sq ft/gal sealing only
Recoat When first coat has cleared and is dry to touch, usually about 1 hour
VOC Low VOC
Surfaces Concrete, stamped concrete, concrete wall block, clay pavers, natural stone, manufactured stone, travertine, exposed aggregate

Who it is for

  • Hardscape and sealing contractors
  • Driveways, pool decks and patios needing maximum durability and gloss

Not recommended for

  • Marble, granite, ceramic tile and polished, honed or high-gloss surfaces (not enough texture to absorb the sealer)

How to use CAT 5

  1. Clean the surface (OxyShock MAX for organics, EffBOMB for efflorescence) and let it dry; for joint stabilization the surface must be dry.
  2. Re-sand joints with SEK Jointing Sand if needed.
  3. Mix Part A and Part B, then dilute with water at the D1 ratio (one 7 gal kit makes 15 gal ready to use) or the D2 ratio (20 gal ready to use), following the Trident label. D1 gives more gloss and stronger joint sand stabilization; D2 is the leaner, economy ratio.
  4. Test in a small area to verify appearance.
  5. Apply the first coat as a flood coat at 80-120 sq ft per gallon (mixed) to saturate the joints, with no pooling.
  6. Apply the second coat once the first has visually cleared and is dry to the touch, usually about one hour.

Using CAT 5 in the Canadian climate

CAT 5 guards against salt and corrosives, which matters on Canadian driveways exposed to de-icers. It is breathable and will not trap moisture. Trident's TDS calls for day and night temperatures between 7 and 35°C (45-95°F), with at least 4°C (40°F) for 24 hours before application. Allow 24 hours before foot traffic and 48 hours before vehicles.

CAT 5 compared

Product Type Finish Joint stabilizing Coverage (per gal, manufacturer)
CAT 5 2-part urethane, water based, film forming Wet look, high gloss Yes (strongest) 80-120 sq ft with joints; 200-300 sealing only (mixed)
Cyclone Water based, film forming Matte, natural Yes 80-120 sq ft with joints; 150-250 sealing only
Break Wall Silane/siloxane, penetrating; made by Trident in Illinois, USA Invisible No 75-200 sq ft pavers; 100-200 concrete
AquaBlocka Waterborne impregnating emulsion, 0 VOC, penetrating Natural No Ask us for coverage on your surface
SP Paver Enhancing Penetrating Colour enhanced, no sheen No See label

CAT 5 FAQ

D1 or D2: which CAT 5 ratio should I use?

Use D1 (one 7 gal kit makes 15 gallons ready to use) when you want more gloss and stronger joint sand stabilization. D2 (20 gallons ready to use) is the leaner, economy ratio for jobs where maximum gloss and joint strength are less critical.

Is Trident CAT 4 still available?

No. Trident CAT 4 has been discontinued and we no longer stock it. CAT 5 is the 2-part urethane we carry: it gives the deepest wet look, high gloss and the strongest joint stabilization, and makes 15 gallons per 7 gal kit at the D1 ratio or 20 gallons at D2.

How much area does a CAT 5 kit cover?

One 7 gal kit makes 15 gallons ready to use at the D1 ratio or 20 gallons at D2. At 80-120 sq ft/gal with joint stabilization that is about 1,200-1,800 sq ft per coat (D1) or 1,600-2,400 sq ft per coat (D2); sealing only, plan on 200-300 sq ft/gal.

Can I seal new pavers right away?

Trident states CAT 5 can be applied on most new, clean and dry surfaces without waiting, because it is breathable.

Is CAT 5 DIY friendly?

It is recommended for professional use.

Will CAT 5 yellow?

No, it will not yellow under sunlight.

Can I use CAT 5 on granite?

No. It is not recommended for marble, granite, ceramic tile or polished surfaces.

How much sealer does one CAT 5 kit make?

One 7 gal kit makes 15 gallons of ready-to-use sealer at the D1 ratio or 20 gallons at the D2 ratio. The CAT 5 half kit is not stocked in Canada.

Use with

StoneSealer Canada ships across Canada from British Columbia, priced in CAD. Contractor and volume pricing is available to account holders: email sales@stonesealer.ca. Trident Protects technical data sheets and SDS are available on request; we can also help you plan quantities for your project.

FAQ

Frequently asked questions

Still unsure which product fits your surface? Our team answers product and application questions.

Ask our team
D1 or D2: which CAT 5 ratio should I use?

Use D1 (one 7 gal kit makes 15 gallons ready to use) when you want more gloss and stronger joint sand stabilization. D2 (20 gallons ready to use) is the leaner, economy ratio for jobs where maximum gloss and joint strength are less critical.

Is Trident CAT 4 still available?

No. Trident CAT 4 has been discontinued and we no longer stock it. CAT 5 is the 2-part urethane we carry: it gives the deepest wet look, high gloss and the strongest joint stabilization, and makes 15 gallons per 7 gal kit at the D1 ratio or 20 gallons at D2.

How much sealer does one CAT 5 kit make?

One 7 gal kit makes 15 gallons of ready-to-use sealer at the D1 ratio or 20 gallons at the D2 ratio. The CAT 5 half kit is not stocked in Canada.

How much area does a CAT 5 kit cover?

One 7 gal kit makes 15 gallons ready to use at the D1 ratio or 20 gallons at D2. At 80-120 sq ft/gal with joint stabilization that is about 1,200-1,800 sq ft per coat (D1) or 1,600-2,400 sq ft per coat (D2); sealing only, plan on 200-300 sq ft/gal.

Can I seal new pavers right away?

Trident states CAT 5 can be applied on most new, clean and dry surfaces without waiting, because it is breathable.

Is CAT 5 DIY friendly?

It is recommended for professional use.

Will CAT 5 yellow?

No, it will not yellow under sunlight.

Can I use CAT 5 on granite?

No. It is not recommended for marble, granite, ceramic tile or polished surfaces.

Bundle Together and SAVE

Total price$2,798.99