Invisible protection from salt and freeze-thaw

Trident | Break Wall Water Based Sealer

Trident Protects USA

Trident Break Wall water based penetrating sealer
Trident Break Wall water based penetrating sealer – view 2
$699.99
  • Fast, tracked shipping
  • Prices in CAD

Trident Break Wall is an invisible, water-based silane/siloxane penetrating sealer that blocks water and road salt and protects concrete, pavers and natural stone from freeze-thaw damage. It is breathable, and cured sealer is freeze resistant to -51°C, making it a strong fit for Canadian driveways, stairs and commercial entrances. Our recommended replacement for AquaBlocka.

  • Freeze resistant to -51°C
  • Silane/siloxane
  • Invisible finish
  • Low VOC

Key benefits

Why choose Trident

  • Silane/siloxane blend

    High-performance silane/siloxane blend with no silicone or wax

  • Water, salt, freeze-thaw

    Protects against water penetration, salt and freeze-thaw damage

  • Inhibits mould and algae

    Inhibits mould, moss and algae growth

  • Breathable

    Breathable: will not trap efflorescence or moisture

  • Dry or damp surfaces

    Applies to dry or damp surfaces; two coats wet-on-wet

  • Invisible finish

    Invisible finish; low VOC (under 300 g/L)

At a glance

Specifications

TypePenetrating silane/siloxane water repellent, non-film forming
BaseWater
FinishInvisible (some surfaces may darken slightly)
Coverage (2 coats)Pavers/hardscape 75-200 sq ft/gal; concrete 100-200; vertical 50-200
Temperature stability (cured)Freeze resistant to -51°C (-60°F); stable to 82°C (180°F)
ToolsLow-pressure high-volume or pump-up sprayer, slit foam roller, masking
VOCLow VOC, EPA compliant
Size5 Gal pail
Made byTrident Protects, Illinois, USA

Works on

  • Driveways
  • Walkways
  • Stairs
  • Garage floors
  • Commercial entrances
  • Drive-thrus
  • Dumpster pads

How to use

Step-by-step application

  1. Clean

    Clean the surface (EffBOMB, OxyShock MAX or GreaseGone MAX as needed).

  2. Mask

    Mask surrounding areas.

  3. First coat

    Spray the first coat to saturation, using about two thirds of your estimate.

  4. Second coat wet-on-wet

    Apply the second coat wet-on-wet at right angles to the first.

  5. Back-roll

    Back-roll with a slit foam roller to avoid puddles.

  6. Let it dry

    Allow to dry; it goes on milky white and dries transparent.

Compare

How Trident compares

Side-by-side with alternatives from our catalogue.

Break WallAquaBlockaCycloneCAT 5
TypeSilane/siloxane, penetrating; made by Trident in Illinois, USAWaterborne impregnating emulsion, 0 VOC, penetratingWater based, film forming2-part urethane, water based, film forming
FinishInvisibleNaturalMatte, naturalWet look, high gloss
Joint stabilizingNoNoYesYes (strongest)
Coverage (per gal, manufacturer)75-200 sq ft pavers; 100-200 concreteAsk us for coverage on your surface80-120 sq ft with joints; 150-250 sealing only80-120 sq ft with joints; 200-300 sealing only (mixed)

Swipe the table sideways to compare.

Full product details

Trident Break Wall is an invisible, water-based silane/siloxane penetrating sealer that blocks water and road salt and protects concrete, pavers and natural stone from freeze-thaw damage. It is breathable, and cured sealer is freeze resistant to -51°C, making it a strong fit for Canadian driveways, stairs and commercial entrances. Our recommended replacement for AquaBlocka.

Key benefits of Break Wall

  • High-performance silane/siloxane blend with no silicone or wax
  • Protects against water penetration, salt and freeze-thaw damage
  • Inhibits mould, moss and algae growth
  • Breathable: will not trap efflorescence or moisture
  • Applies to dry or damp surfaces; two coats wet-on-wet
  • Invisible finish; low VOC (under 300 g/L)

Break Wall specifications

Specification Detail
Type Penetrating silane/siloxane water repellent, non-film forming
Base Water
Finish Invisible (some surfaces may darken slightly)
Coverage (2 coats) Pavers/hardscape 75-200 sq ft/gal; concrete 100-200; vertical 50-200
Temperature stability (cured) Freeze resistant to -51°C (-60°F); stable to 82°C (180°F)
Tools Low-pressure high-volume or pump-up sprayer, slit foam roller, masking
VOC Low VOC, EPA compliant
Size 5 Gal pail
Made by Trident Protects, Illinois, USA

Who it is for

  • Driveways, walkways, stairs and garage floors
  • Commercial entrances, malls, drive-thrus and dumpster pads
  • DIY or professional installers

Not recommended for

  • Marble, granite, ceramic tile, polished, honed or high-gloss surfaces, and asphalt; test limestone first

How to use Break Wall

  1. Clean the surface (EffBOMB, OxyShock MAX or GreaseGone MAX as needed).
  2. Mask surrounding areas.
  3. Spray the first coat to saturation, using about two thirds of your estimate.
  4. Apply the second coat wet-on-wet at right angles to the first.
  5. Back-roll with a slit foam roller to avoid puddles.
  6. Allow to dry; it goes on milky white and dries transparent.

Using Break Wall in the Canadian climate

Break Wall is built for exactly what Canadian hardscapes face: water, road salt and freeze-thaw. Cured, it is freeze resistant to -51°C.

Break Wall compared

Product Type Finish Joint stabilizing Coverage (per gal, manufacturer)
CAT 5 2-part urethane, water based, film forming Wet look, high gloss Yes (strongest) 80-120 sq ft with joints; 200-300 sealing only (mixed)
Cyclone Water based, film forming Matte, natural Yes 80-120 sq ft with joints; 150-250 sealing only
Break Wall Silane/siloxane, penetrating; made by Trident in Illinois, USA Invisible No 75-200 sq ft pavers; 100-200 concrete
AquaBlocka Waterborne impregnating emulsion, 0 VOC, penetrating Natural No Ask us for coverage on your surface
SP Paver Enhancing Penetrating Colour enhanced, no sheen No See label

Break Wall FAQ

Where is Break Wall made?

Break Wall is made by Trident Protects in Illinois, USA.

Does Break Wall change the look of concrete?

It is invisible; some surfaces may darken slightly. Test first.

Does Break Wall protect against road salt?

Yes, it protects against water and salt infiltration and freeze-thaw damage.

How much area does a pail cover?

At 75-200 sq ft/gal on pavers, a 5 gallon pail covers about 375-1,000 sq ft with 2 coats; concrete 100-200 sq ft/gal.

Can I apply it to damp concrete?

Yes, it applies to dry or damp surfaces.

How long does Break Wall last?

Trident recommends re-application every 5-8 years.

Is it a replacement for AquaBlocka?

Yes, during AquaBlocka supply interruptions.

Use with

StoneSealer Canada ships across Canada from British Columbia, priced in CAD. Contractor and volume pricing is available to account holders: email sales@stonesealer.ca. Trident Protects technical data sheets and SDS are available on request; we can also help you plan quantities for your project.

FAQ

Frequently asked questions

Still unsure which product fits your surface? Our team answers product and application questions.

Ask our team
Where is Break Wall made?

Break Wall is made by Trident Protects in Illinois, USA.

Does Break Wall change the look of concrete?

It is invisible; some surfaces may darken slightly. Test first.

Does Break Wall protect against road salt?

Yes, it protects against water and salt infiltration and freeze-thaw damage.

How much area does a pail cover?

At 75-200 sq ft/gal on pavers, a 5 gallon pail covers about 375-1,000 sq ft with 2 coats; concrete 100-200 sq ft/gal.

Can I apply it to damp concrete?

Yes, it applies to dry or damp surfaces.

How long does Break Wall last?

Trident recommends re-application every 5-8 years.

Is it a replacement for AquaBlocka?

Yes, during AquaBlocka supply interruptions.

Use with

More from this range