BREAK WALL

Superior Water Repelling & Salt Blocking Sealer

 

Break Wall is a high performance silane/siloxane blend that protects the surface from water penetration, salt & freeze/thaw damage. Its advanced reactive chemistry provides excellent surface protection. Break Wall is a water based invisible penetrating sealer.

 

Due to supply chain issues this sealer should be used as a direct replacement for the AquaBlocka Sealer made by StoneSealer Group until further notice.

 

Applications:

  • Driveways

  •  Walk Ways/Stairs

  •  Garage Floors

  •  Industrial Flooring

  •  Building Entrances

  •  Shopping Malls

  • Restaurant Drive-Thrus

  • Dumpster Pads

  •  

    Natural Stone (not polished or highly dense like granite or quartz)

  • Broomed / Plain concrete in a residential or commercial area

  • Any high use hardscape surface where protection from water and salt are important.

Features:

HIGH PERFORMANCE SILANE/SILOXANE BLEND

 

  • Does not contain any silicone or wax components

ADVANCED REACTIVE CHEMISTRY

  • Provides excellent surface protection against water and salt infiltration

SUPERIOR WATER REPELLENCY

  • Inhibits biological growth such as mold, moss & algae

BREATHABLE, IMMEDIATE APPLICATION

  • Will not trap naturally occurring efflorescence and/or moisture
  • Can be applied on a new, clean and dry surface without waiting* (see Surface Preparation in application instructions)

EASY TO APPLY

  • Applies easily on dry or damp surfaces
  • Apply two coats wet-on-wet for optimal performance

INVISIBLE PENETRATING WATER BASED SEALER

  • Does not alter the appearance of the surface (some surfaces may darken slightly)
  • Non-film forming
  • Consistency of water and milky white in appearance when applied. Dries transparent.
  • Environmentally friendly, EPA compliant LOW VOC formula

TEMPERATURE STABLE

    • Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C)

Tools Required

  • Low pressure, high volume sprayer such as an airless sprayer or hand held pump-up sprayer
  • Slit foam roller
  • Paint shield or Masking Supplies 

Why Choose Break Wall?

  • High performance product from trusted Trident Brand
  • Made in North America
  • Large range of surfaces able to be sealed
  • Long lasting protection, vastly superior to acrylic film forming sealers
  • No visible finish or colour change, not slippery when wet
  • DIY or Professional installation options

PAVERS & OTHER HARDSCAPE SURFACES

  • 75-200 square feet
  • 7 - 18.6 square meters

CONCRETE

  • 100-200 square feet
  • 9.3-18.6 square meters

RETAINING WALLS & OTHER VERTICAL SURFACES

  • 50-200 square feet
  • 4.6-18.6 square meters

Coverage based on two coats applied wet-on-wet at right angles to first coat. Use approximately two thirds of the estimated amount on the first coat and one third on the second ensuring saturation. Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature.

Concrete Roof Tiles, Asphalt Shingles, Wood, Granite, Marble, Sandstone, Grout, Mortar, Limestone, Stucco, Brick, Cement, Concrete et Stone

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)